Archive for the ‘Heating’ Category

I’m Calling it Spring

7 March 2010

The geese have been flying around in pairs and small Vs honking for the last couple of weeks. We’re down to 80-90% snow cover. The compost was up to 81°F a couple of days ago. I heard a sandhill crane. I’m calling it Spring.

So today I planted a 7′ row of kale in the bed just outside the back door. I just dropped the seeds on top of the mud and sprinkled some potting soil on top. Nothing ventured, nothing gained. I also pounded in a couple of stakes at either end of the row and screwed a piece of scrap 1×2 between them, about 18″ off the ground, so I can drape plastic when we get hard freezes after they come up.

March can be such a wonderful and horrible month. I’m desperately longing for sun and warmth, and when the March sun shines on the snow and the wind dies for a moment, it’s almost there. But you know it won’t last and one more big snow is almost inevitable.

Also spread about 10 gallons of wood ashes and charcoal on the gardens. I’m using a 10-gallon metal trash can for getting the ashes out of the wood stove, which lets me do it while there are still coals in there. Those coals become charcoal. That then goes in the garden, slowly building up my terra preta. I’m only slightly concerned that it seems like an awful lot of ash this year — I hope I don’t make the soil too alkaline. On the other hand, this leaves me free to use more acidic organic matter in the garden, such as pine needles.

Got up on the roof today and swept the chimney. The screen at the top was completely blocked with dried creosote — the only way for the smoke to get out was a half-inch gap on top of the screen. There didn’t seem to be that much creosote in the chimney itself, except for the top inch or so (there were 2-3 cups of the stuff down in the stove after I got done).

That screen was quite disgusting — I had to knock the stuff out with the handle of my screwdriver, that’s how thick and hard it was. It’s difficult to believe we have been using the stove right along without major problems, although we certainly noticed that the draft was not what it should have been.

Anyway, if we’re burning a lot of wood, the mid-winter cleaning is not optional, and more frequently would be better. Pretty much whenever it’s warm and dry enough, I should get up there and do it. Maybe I should just take out that screen in the winter and put it back in in the Spring.

And yes, it takes all three extension rods to get the full length of the chimney.

Winter

4 December 2009

Winter arrived yesterday with 2 or 3 inches of snow and horrible driving conditions on the way home from work, followed by colder temps and wind today. It had to happen sometime.

And so we turned on the furnace today. For now, we just put a floor under the temp by setting it at 60°F — if we want to be warmer than that, we have to use the woodstove. I tend to become more sensitive to the cold as the Winter goes on, so we’ll probably gradually turn up the thermostat as we get into late January and February.

We could have gone longer without turning on the furnace…but we did need to know if it worked or not before it got really cold (seems like in the last 5 years the furnace hasn’t worked as often as it has the first time we’ve turned it on for the season), and I like the idea of putting a floor under the indoor temperature in case we forget to stoke the stove before bed or before going out.

I noticed that it was about 48°F in the basement this morning.

Heating +

1 December 2009

STILL haven’t turned on the furnace — just amazing. It’s not only because we’re putting up with a chillier house or that we’re being especially diligent, it’s also that the weather has been exceptionally mild. I’m still harvesting collards and kale from the garden, without doing anything to protect them. Kinda weird, but hard to complain….

I took a vacation day today since it was supposed to be a nice day and I’d have a chance to work outside. So I did the biochar thing (see above) and also finished connecting the two West beds into one nice big garden space by digging up sod. Corn and tomatoes will go there next year.

Also put 10 gallons of coffee grounds on top of part of the freshly-dug sod there, then a wheelbarrow of leaf compost on top of that. That’s a good way to add coffee grounds without having to dig a trench (which is hard to do where I’ve just turned over the sod). Too bad I’m almost out of leaf compost and the county composting site is closed until April. Maybe in the Spring I’ll hire someone with a dump truck to get the compost for me — sure would save a lot of time and effort.

Turning over sod for 2 or 3 hours is hard work, and I’m fantasizing about a rototiller. I’ll need something if we get much more land under cultivation. It’s hard for me to imagine maintaining a garden even one acre in size without power tools.

Also put 10 gallons of stabilized gasoline into storage today — NOT in the house or garage. I plan to change it once a year.

More Gardening

22 November 2009

The warm November weather continues, with the high today around 60°F. I dug up another couple of rows of sod in the West beds, and am about to connect two of them. Will plant tomatoes and corn there next year, so I want to make the soil as rich as possible. I’ll do some sheet composting with coffee grounds and leaf compost and straw until it snows. Since corn and tomatoes go in pretty late, a lot of decomposition will happen in the Spring after it warms up but before planting. As I’ve mentioned before, the soil on the slope up to the house gets pretty shallow and gravelly, so it needs some help.

Dug another 5 gallons of coffee grounds into the West bed just outside the back door, so that one is done. Also moved a couple of wheelbarrows of leaf compost to the West beds and one wheelbarrow to the garden.

We still haven’t turned on the furnace and have been using the woodstove every day, so we’re making lots of wood ashes that I’m dumping on the garden beds. I’m making charcoal whenever I can, because of its beneficial effects on garden soil. I do that by shutting down the stove as much as possible and letting it go out before all the wood burns completely. It’s not always convenient to do that, but I do it when I can. I started using the old painted-on-the-inside cast iron dutch oven to carry the ashes outside, so I can do it even if there are still some live coals, which I then bury in the soil to extinguish them and make charcoal.

Reloaded the back porch with firewood. Broke up a 5-gallon bucket full of apple sticks for kindling.

Thermal Mass

4 October 2009

Last year, I put a 3-gallon pail of water a couple inches from the side of the woodstove to act as thermal mass and to humidify the air. It didn’t work that well. It’s a galvanized steel pail, so the outside is very shiny and it reflected most of the heat radiating from the side of the stove, not to mention the cooling effect of the water evaporating from the surface. The water in the pail wasn’t stone cold, but it wasn’t as warm as tepid either.

So last Spring, after heating season, I painted the outside of the pail flat black (with high-temp paint). And this year, the water in there is quite warm when the stove is running. It should work much better for both of the above-stated purposes, as well as backup warm water for washing if ever needed. It’s amazing to me that a coat of paint can make that much difference.